Skip to content
MotoIrons | Vintage Springer Forks & Harley Custom Parts - vintage motorcycle front ends and iron works
Get a Quote

Click image to view full size

handlebars Fitment Checked

Single Piece Order Ape Hanger Handlebars for Big Twin

Ape Hanger Handlebars for Big Twin 1982-Later, 18″ Rise and 1 1/2″ Diameter

  • Verify the 1 1/2″ diameter matches your triple trees and confirm the 18″ rise with 5″ pullback aligns with your cable lengths for Fly-By-Wire models to avoid fitment delays.
  • We confirm fitment against your model year before quoting, offer single-piece minimum orders, and provide samples for verification.
Fitment Confirmed
Before Quote
Factory Direct Since 2003
Finish 4 Surface
Options
OEM/ODM Custom
Available

Surface Finish

Triple chrome plating -- maximum shine and corrosion resistance.

Technical Data

Specifications

Category handlebars
Finish Options Chrome · Black · Copper · Raw
OEM / ODM Available -- contact factory
MOQ Flexible -- single pieces welcome
Packaging Individual carton, foam-protected
Lead Time Stock: 3-7 days · Custom: 15-30 days

Compatibility

Fitment Chart

Fitment depends on your exact model and year. Send us your bike details and we will confirm compatibility before quoting.

Not sure it fits your bike?

Ask for fitment check

Full Details

Product Description

Fitment Verified by Year Range — Every handlebar dimension is checked against your specific Big Twin model year before quotation to prevent clamp and wiring misalignment.

Product Specification

Parameter Value
Part Type Handlebars
Diameter 1 1/2″
Pullback 5″
Rise 18″
Riser Area O.D. 1″
Finish Black
Wiring Drilled for internal wiring

Fitment

Platform Year Range Notes
Big Twin 1982-later including Fly-By-Wire models

Independent aftermarket part. Not manufactured, sold or endorsed by any motorcycle manufacturer. Model names and OEM numbers are used for fitment reference only.

Why Missing Wiring-Hole Details Ruins Custom Builds

Pre-drilled internal wiring paths must align perfectly with the specific control housing of your model year.

Handlebar listings often omit exact rise, pullback, or wiring-hole locations, causing massive delays for custom builders. I once shipped 1 1/2″ diameter bars with standard internal wiring holes to a shop that only mentioned the model, skipping the year. The bars arrived, but his older machine needed a 1″ clamp area and specific pullback. The bars would not seat in his risers, and the wiring holes misaligned with his controls. Now, verifying the exact year and wiring-hole details is mandatory before quoting ape hanger handlebars for harley-davidson big twin setups.

Black 18 inch rise handlebars drilled for internal wiring on a custom motorcycle

Checking Riser Clamp Compatibility

Before ordering, verify that your triple trees and risers can accommodate the 1 1/2″ outer diameter of these handlebars. The riser area O.D. steps down to 1″ to ensure a secure grip in standard aftermarket clamps. Confirming this transition zone prevents the bars from slipping or cracking under vibration.

Routing Internal Wiring for Fly-By-Wire Models

The 18″ rise and 5″ pullback provide a classic profile, but the internal wiring holes must match your specific routing needs. For Fly-By-Wire models, the drill points must align precisely with the throttle and switch housing mounts. Misaligned holes force builders to drill new paths, weakening the steel and ruining the black finish.

Understanding Handlebar Geometry

An 18″ rise combined with a 5″ pullback significantly alters your riding position and cable routing. You must measure your existing throttle, brake, and clutch lines to ensure they have enough slack for this taller profile. The 1 1/2″ diameter provides the necessary strength for the height, while the 1″ riser area maintains compatibility with standard mounting hardware.

Close up of black handlebar finish and internal wiring drill holes

The Hidden Cost of Incorrect Fitment

Ordering handlebars without confirming the riser area O.D. often leads to parts sitting on a shelf. If the 1″ clamp zone is machined incorrectly, the bars will not seat flush, creating a dangerous stress point. Furthermore, if the internal wiring holes are drilled for a different year range, you will have to modify the controls or the bars, wasting hours of labor and compromising the black finish.

Sourcing Controls with Certainty

We source these control parts from qualified manufacturing partners under one account and one warranty. Fitment is confirmed against the Big Twin platform and 1982-later year range before any quotation is sent. We offer a minimum order from one piece, allowing custom builders to test the black finish and dimensions on a single bike. Cross-referencing against factory numbers ensures you get the exact geometry needed for your build.

Documentation Provided

  • Fitment sheet stating applicable Big Twin platforms and 1982-later year ranges
  • Key dimensions including 1 1/2″ diameter, 18″ rise, and 5″ pullback
  • Finish specification for the black coating
  • Quality inspection record verifying internal wiring hole alignment
  • Warranty terms covering manufacturing defects

Receiving and Pre-Installation Checks

  • Verify the 1 1/2″ diameter and 1″ riser area O.D. match your riser clamps
  • Check that the internal wiring holes align with your specific model year controls
  • Inspect the black finish for any shipping damage or coating inconsistencies
  • Measure the 18″ rise and 5″ pullback against your custom geometry requirements
  • Ensure all handlebars are stored in a dry environment to prevent surface corrosion

Requesting a Fitment Check

Send your exact Big Twin model and year to verify if these 18″ ape hangers match your cable lengths and control routing. Provide a photograph of your current risers or old handlebars if the year is unknown. We can also supply a single piece for fitment confirmation before you commit to a larger order for your shop.

Frequently Asked Questions

Q: How do I confirm my specific model year fits these 18″ ape hangers?

A: Provide your exact Big Twin model and year. We check the 1 1/2″ diameter, 1″ riser area, and internal wiring hole alignment against your specific year range, including Fly-By-Wire setups, before confirming fitment.

Q: What dimensions must I measure to ensure these fit my risers?

A: Measure your riser clamp inner diameter to ensure it accepts the 1 1/2″ outer diameter. Also, verify the clamp depth matches the 1″ riser area O.D. to guarantee a secure mount without slipping.

Q: Are the internal wiring holes aligned for Fly-By-Wire controls?

A: Yes, but alignment varies by year. We verify the drill points against your specific 1982-later or Fly-By-Wire model to ensure they match your switch housings perfectly without requiring extra modifications.

Q: Can I order a single handlebar for a custom build?

A: Yes, we accept a minimum order from one piece. This allows custom builders and repair shops to test the black finish, 18″ rise, and wiring alignment on a single bike before placing bulk orders.

Q: How is finish consistency maintained on black handlebars?

A: We provide detailed finish specifications and quality inspection records with every shipment. This ensures the black coating matches across batches, preventing visible differences when parts are fitted side by side.

Surface Options

Four Finishes. One Factory.

Consistent tone across fork, handlebar and sissy bar -- order as a coordinated set.

Factory Direct

Request a Quote

Tell us your model year, desired finish and quantity. Our factory team responds within one business day with pricing, lead time and fitment confirmation.

Quoting for

Single Piece Order Ape Hanger Handlebars for Big Twin

  • Fitment confirmed before production
  • Wholesale pricing for dealers & distributors
  • OEM & ODM -- drawings, samples, tooling
  • Flexible MOQ -- small runs welcome
Sending...
Request Quote