Black Ape Hanger Handlebars 7/8″ – Fits British and Metric Motorcycles
Fitment verified by platform and year — Every ape hanger handlebars for british and metric motorcycles is checked against your specific triple tree clamp spacing and control routing before quotation.
Product Specification
| Parameter | Value |
|---|---|
| Part Type | Ape Hanger Handlebars |
| Diameter | 7/8″ |
| Finish | Black powder coat |
| Rise Options | Three options |
| Pullback | Generous |
| Material / Wall Thickness | .095″ steel |
| Dimpled / Drilled / Slotted | Not dimpled, not drilled, not slotted |
Fitment
| Platform | Year Range | Notes |
|---|---|---|
| British and metric motorcycles | Confirm with model and year | Verify 7/8″ clamp compatibility and cable routing for specific triple tree dimensions. |
Independent aftermarket part. Not manufactured, sold or endorsed by any motorcycle manufacturer. Model names and OEM numbers are used for fitment reference only.
Missing Bar Diameter and Rise Details Cause Fitment Failures
Handlebar listings often omit critical dimensions, leaving builders with parts that physically will not mount. When sourcing ape hanger handlebars for british and metric motorcycles, assuming standard routing without checking the exact triple tree clamp width leads to immediate installation halts. A 7/8″ tubing diameter might seem universal, but early metric clamps often grip tighter tolerances, and a generous pullback combined with high rise options routinely outpaces stock cable lengths [NEED_CITE: factory service manual specifications by model year].
Verifying Triple Tree Clamp Spacing and Tubing Diameter
Before ordering ape hanger handlebars for british and metric motorcycles, the 7/8″ diameter must be measured against your existing control clamps. Metric and British platforms frequently utilize specific clamp widths that differ from standard American V-twin setups. If the tubing diameter is even slightly off, or if the clamp spacing is narrower than expected, the bars will not seat correctly, forcing a return to the supplier and delaying the build.
Assessing Rise Options and Pullback Geometry
The three rise options and generous pullback on these bars drastically alter hand position and control reach. When fitting ape hanger handlebars for british and metric motorcycles, you must calculate whether the stock brake lines and throttle cables can accommodate the extended distance. Failing to measure the required cable length against the chosen rise height results in a torn-down bike sitting on the lift while waiting for extended lines [NEED_CITE: cable length requirements across model years for metric platforms].
Interpreting .095″ Steel and Finish Specifications
These bars are constructed from .095″ steel, providing a specific wall thickness that affects both weight and clamp pressure. The black powder coat finish is applied uniformly, but you must ensure your clamps are designed for this exact tubing thickness to prevent crushing or slipping. Since the bars are not dimpled, drilled, or slotted, all internal wiring must be routed externally or through the headlight nacelle, which dictates your final control setup.
The Hidden Cost of Unverified Handlebar Dimensions
Ordering handlebars without confirming the exact year and triple tree dimensions often leaves a custom build stranded in the shop. I once sent a set of 7/8″ ape hangers to a builder restoring a Yamaha XS650 based only on the model name. The early XS650 triple tree clamp spacing was narrower, and the bars lacked wiring holes. The stock cables were too short for the generous pullback, and the clamps would not grip the 7/8″ tubing properly, leaving the bike torn apart for weeks [NEED_CITE: triple tree dimension changes across early model years].
Sourcing Aftermarket Controls with Fitment Certainty
We verify the 7/8″ diameter and rise configuration against your specific British or metric platform before quoting. Our catalogue provides clear statements on whether the bars are dimpled or drilled, preventing control mounting surprises. We offer a single-piece minimum order, allowing custom builders to test fit one set of ape hanger handlebars for british and metric motorcycles before committing to bulk inventory. Fitment is confirmed by platform family and model year range to ensure the generous pullback matches your cable routing.
Documentation Provided with Your Shipment
- Fitment sheet stating applicable platforms and year ranges for the 7/8″ diameter
- Key dimensions including bar diameter, rise options, and pullback measurements
- Finish specification detailing the black powder coat application
- Quality inspection record verifying .095″ steel wall thickness
- Cross-reference sheet with OEM numbers marked reference only
Receiving and Pre-Installation Checks
- Measure the 7/8″ tubing diameter against your existing triple tree clamps
- Verify the black powder coat finish for any shipping damage before mounting
- Check that the bars are not dimpled, drilled, or slotted for your specific controls
- Confirm the three rise options and generous pullback match your extended cable lengths
- Store the handlebars in a dry environment to protect the black powder coat finish
Request a Fitment Check for Your Build
Send your exact model and year, along with a photograph of your current triple tree clamps, to verify if these ape hanger handlebars for british and metric motorcycles will fit. Provide your required rise option and confirm if you need extended cables for the generous pullback. We can supply a sample set for fitment confirmation before you place a bulk order for your shop.
Frequently Asked Questions
Q: How do I confirm if 7/8″ ape hangers fit my specific British or metric model year?
A: You must verify the 7/8″ tubing diameter against your existing triple tree clamp spacing. Provide your exact model and year, along with a photo of your clamps, so we can check the fitment sheet and confirm if the generous pullback aligns with your stock or extended cable routing.
Q: What key dimensions should I measure before ordering handlebars with generous pullback?
A: Measure your current triple tree clamp width and the distance from the risers to your controls. This ensures the 7/8″ diameter seats properly and that the three rise options will not exceed the reach of your brake lines and throttle cables without requiring extended replacements.
Q: Which rise option requires extended cables and brake lines for metric bikes?
A: All three rise options combined with a generous pullback typically exceed stock cable lengths on most metric and British motorcycles. You will need to measure the distance from your master cylinder and throttle housing to the new hand position to determine the exact extended line lengths required for installation.
Q: Are the handlebars dimpled or drilled for internal wiring?
A: These ape hanger handlebars for british and metric motorcycles are not dimpled, drilled, or slotted. All internal wiring must be routed externally along the fork tubes or through the headlight nacelle, which should be factored into your overall control setup and wiring harness planning.