Alternator Stator 50 AMP for FLH FLT 2006-Up – Fitment Checked
Cross-Referenced Fitment Verification — We cross-reference 29987-06B against the exact FLH and FLT model years to ensure the unmolded 50 AMP unit matches your charging system before dispatch.
Product Specification
| Parameter | Value |
|---|---|
| OEM Reference | 29987-06B (reference only) |
| Part Type | Alternator Stator |
| Output | 50 AMP |
| Type | Unmolded |
Fitment
| Platform | Year Range | Notes |
|---|---|---|
| FLH & FLT models | 2006-up | Verify exact model year and connector type before ordering. |
Independent aftermarket part. Not manufactured, sold or endorsed by any motorcycle manufacturer. Model names and OEM numbers are used for fitment reference only.
Avoiding Plug Failures When Sourcing an Alternator Stator for FLH FLT
Connector styles and wiring harness configurations changed significantly around the 2006 model year for these touring platforms.
When shops order an alternator stator for flh flt using an old manual number without checking the exact year range, the 50 AMP unmolded unit often arrives at the bench but simply will not plug in. This leaves the motorcycle dead on the floor and delays the build schedule. Verifying the connector type and wire count against the specific model year prevents this exact scenario [NEED_CITE: connector changes across model years for this platform].
Checking Year Ranges and Connector Styles
Electrical configurations for FLH and FLT models shifted, meaning the plug style on an alternator stator for flh flt must match the existing voltage regulator rectifier harness. If the year range is overlooked, the physical connection fails even if the output rating is correct. Always confirm the unmolded design matches the primary case clearance and that the connector aligns with the 2006-up wiring layout.
Verifying Output and Unmolded Design
The 50 AMP output rating is designed for high-demand electrical setups common on modern touring builds. An unmolded stator requires specific installation and heat dissipation considerations within the primary case. Confirming these specs against the platform ensures the charging system meets the electrical load without overheating [NEED_CITE: factory service manual specifications by model year].
The Hidden Cost of Misidentified Electrical Parts
Ordering an alternator stator for flh flt based on a superseded part number from an older manual often results in a component that arrives but does not plug in. The bike remains dead on the floor while the shop waits for a replacement, wasting labor hours and delaying the customer. Cross-referencing the exact year range and connector type before quotation eliminates this costly downtime and prevents返工 [NEED_CITE: part number supersession across model years].
Sourcing with Fitment Certainty
We confirm fitment against the FLH and FLT platform family and the 2006-up year range before quoting any alternator stator for flh flt. Our cross-reference against 29987-06B is marked reference only to ensure accurate identification without claiming factory status. We support a single piece minimum order, allowing repair shops and custom builders to source exactly what they need for one bike without bulk requirements.
Documentation Provided
- Fitment sheet stating FLH and FLT platforms and 2006-up year ranges
- Cross-reference sheet with 29987-06B marked reference only
- Key dimensions including 50 AMP electrical rating and connector type
- Quality inspection record for the unmolded stator unit
- Warranty terms and packing photographs
Receiving and Pre-Installation Checks
- Verify the 50 AMP output rating matches the existing voltage regulator rectifier harness
- Confirm the unmolded stator type fits the primary case mounting and clearance
- Check the connector plug style against the 2006-up FLH and FLT wiring diagram
- Inspect the stator windings for any shipping damage before installation
- Have a qualified technician verify the electrical connections during assembly
- Store the unit in a dry environment to prevent moisture damage before fitting
Requesting a Fitment Check
Send your exact FLH or FLT model and year for a fitment check before ordering your alternator stator for flh flt. Provide the old part number, a photograph of the existing connector plug, or key measurements if the number is unknown. We will verify the 50 AMP unmolded unit matches your specific charging system requirements and confirm availability for a single piece order.
Frequently Asked Questions
Q: How do I confirm if my specific FLH or FLT model year is compatible with this 50 AMP stator?
A: You must verify the exact model year, as electrical configurations and connector plug styles changed around 2006. Send us your model and year, and we will cross-reference 29987-06B to ensure the unmolded unit matches your specific wiring harness and charging system requirements.
Q: What are the differences in connector types between early and late FLH/FLT models?
A: The connector plug style and wire count changed for FLH and FLT models starting in 2006. An unmolded 50 AMP stator designed for the later years will not physically plug into the harness of an earlier model, which is why confirming the exact year range and connector type is critical before ordering.
Q: How can I cross-reference my old part number if it has been superseded?
A: Send us the old part number from your manual, and we will cross-reference it against 29987-06B (reference only). We check for supersessions across model years to ensure the replacement alternator stator for flh flt matches the current electrical configuration of your specific bike.
Q: Can I order a single stator for a custom build or restoration shop project?
A: Yes, we support a single piece minimum order. You can order one 50 AMP unmolded stator for your specific FLH or FLT project without needing to meet bulk quantity requirements, and we will provide a fitment sheet confirming the 2006-up year range before dispatch.
Q: What documentation is provided to verify the electrical rating before bulk ordering?
A: We provide a fitment sheet stating the applicable FLH and FLT platforms and 2006-up year ranges, along with a cross-reference sheet marking 29987-06B as reference only. We also document key dimensions, including the 50 AMP electrical rating and connector type, to verify the part matches your needs.