Aftermarket Replacement Jackknife Handlebars for Small Frames 1982-Up
Single-Piece Fitment Verification — We confirm platform and year range compatibility before dispatch, allowing custom shops to order exactly one set for a build without meeting high minimums.
Product Specification
| Parameter | Value |
|---|---|
| Part Type | Handlebars |
| Style | Narrow style, Jackknife |
| Center Diameter | 1 1/2″ |
| Riser Mount Diameter | 1″ |
| Total Width | 36″ |
| Center Width | 9 3/4″ |
| Rise | 12″ |
| Pullback | 8″ |
| Wiring | Drilled for internal wiring |
| Finish | Chrome or Black |
Fitment
| Platform | Year Range | Notes |
|---|---|---|
| Small Frames | 1982-up | Fits 1982/later models including Fly-By-Wire |
Independent aftermarket part. Not manufactured, sold or endorsed by any motorcycle manufacturer. Model names and OEM numbers are used for fitment reference only.
Why Standard Widths Fail on 1982-Up Small Frames
Jackknife handlebars for small frames require precise center and pullback dimensions to clear the fuel tank and match wire lengths.
When builders order tall bars without checking the pullback angle, the 8″ pullback on a 12″ rise can push the controls directly into the tank on smaller frames [NEED_CITE: frame geometry and tank clearance variations across small frame models]. I once saw a shop order 12-inch jackknife bars for a 1982/later model but overlook the Fly-By-Wire routing. The internal wiring holes missed the newer harness path, and the center width forced a complete re-map of the pullback angle just to clear the tank.
Checking Riser Mount and Center Diameter Transitions
The 1 1/2″ center diameter tapering to a 1″ riser mount is a critical measurement for these jackknife handlebars for small frames. If your risers or clamps expect a different transition, the bars will not seat correctly. You must verify that the 9 3/4″ center width aligns with your specific fuel tank shape and control placement before finalizing the order.
Verifying Internal Wiring Paths for Fly-By-Wire
These handlebars are drilled for internal wiring, but the drill path must match the harness routing of your specific 1982-up model. Fly-By-Wire setups introduced after 1982 changed how wires route through the riser area [NEED_CITE: wiring harness routing changes for Fly-By-Wire models]. Confirming the exact entry and exit points of the drilled holes prevents the need to re-drill or run external lines.
The Cost of Overlooking Pullback and Width
Ordering handlebars without confirming the 36″ total width and 8″ pullback often leads to parts sitting on the shop floor. A bar that is too wide will interfere with mirrors or controls, while an incorrect pullback angle forces the rider’s wrists into an unnatural position or causes the bar ends to hit the tank. These jackknife handlebars for small frames are dimensioned to avoid these specific clearance issues, but only if the buyer measures their existing setup first.
Sourcing with Fitment Certainty
We verify fitment against the Small Frames platform and 1982-up year range before quoting. You can choose between chrome or black finishes, knowing the batch quality remains consistent across your inventory. We support a one-piece minimum order, meaning you can buy a single set for a custom build without tying up capital in bulk stock.
Documentation Provided
- Fitment sheet stating applicable platforms and 1982-up year ranges
- Key dimensions including bar diameter, rise, width and pullback
- Finish specification for your chosen chrome or black option
- Cross-reference sheet available if replacing existing handlebars
Pre-Installation Checks
- Measure the 1″ riser mount to ensure it matches your clamps
- Verify the 36″ total width clears your specific fuel tank
- Check the 9 3/4″ center width against your control placement
- Inspect the drilled holes to confirm they align with your wiring harness
- Ensure the 12″ rise and 8″ pullback suit your riding position
Requesting a Fitment Check
Send your exact model and year to verify if these jackknife handlebars for small frames will clear your tank and match your wiring. Provide your riser mount diameter and any specific center width requirements you have measured. We can also supply a sample for fitment confirmation before you commit to a larger order for your shop.
Frequently Asked Questions
Q: How do I confirm my 1982-up small frame model fits these jackknife handlebars?
A: Verify that your bike uses a 1″ riser mount and that the 9 3/4″ center width clears your fuel tank. Check that the 12″ rise and 8″ pullback match your cable and wire lengths. Send your exact model and year for a final fitment check before ordering.
Q: What key dimensions must I measure before ordering aftermarket handlebars?
A: You must measure your riser clamp diameter to match the 1″ mount, check your fuel tank clearance against the 36″ total width, and verify your wiring harness length against the 12″ rise. The 9 3/4″ center width must also align with your control placement.
Q: Are these handlebars drilled for internal wiring on both sides?
A: Yes, these handlebars are drilled for internal wiring to accommodate standard routing. However, you must verify that the drill path matches the specific harness entry points for your 1982-up model, especially if it uses a Fly-By-Wire setup.
Q: Can I order a single piece for a custom build?
A: Yes, we support a one-piece minimum order. You can purchase a single set of these jackknife handlebars for small frames for a specific custom build without needing to meet a high bulk quantity requirement.
Q: Do you provide a fitment sheet with dimensions before bulk orders?
A: Yes, we provide a fitment sheet listing the 1982-up year ranges and key dimensions like the 1 1/2″ center diameter and 8″ pullback. We also include finish specifications for your chosen chrome or black option to ensure consistency.