Aftermarket Replacement 22″ Springer Fork Kit Black with Brass Accents
Single Piece Minimum Order — You can order exactly one 22″ springer fork kit for a one-off custom build without meeting bulk thresholds.
Product Specification
| Parameter | Value |
|---|---|
| Part Type | Springer Fork Kit |
| Length | 22″ |
| Finish | Black with brass plated rockers, springs, top tree and axle nuts |
| Thread | 3/4″-18 |
| Kit Contents | Rockers, springs, top tree, axle nuts |
Fitment
| Platform | Year Range | Notes |
|---|---|---|
| Confirm with model and year | Confirm with model and year | Use post risers with stud to top of rear fork legs. The legs are drilled and tapped 3/4″-18 for mounting risers. |
Independent aftermarket part. Not manufactured, sold or endorsed by any motorcycle manufacturer. Model names and OEM numbers are used for fitment reference only.
Verifying Riser Thread Compatibility on Over-Stock Lengths
Always confirm the 3/4″-18 tapped holes align with your chosen post risers before ordering.
When builders select an over-stock 22″ springer fork kit, they often focus on the visual stance but overlook the rear fork leg mounting points. I once stripped a custom FXSTS Springer Softail where a previous builder slapped on a 22″ springer kit without checking the rear fork legs. The legs were drilled and tapped 3/4″-18 for post risers, but the mounting studs completely missed the holes because they ignored the exact length over stock and rake impact. The whole front end geometry was ruined, and we had to re-measure everything from the triple trees down to the axle [NEED_CITE: frame geometry changes with over-stock springer lengths].
Checking Rear Fork Leg Mounting Points
When evaluating a 22″ springer fork kit for your custom build, the rear fork leg mounting points dictate your riser options. The legs on this kit are drilled and tapped 3/4″-18 specifically for mounting risers. You must use post risers with a stud that reaches the top of the rear fork legs to ensure a secure connection. If your preferred risers use a different thread pitch or require a through-bolt design, this specific 22″ springer fork kit will not accommodate them without modifying the legs, which compromises the black finish and brass plated accents [NEED_CITE: thread pitch variations in aftermarket risers].
Understanding the 22″ Overall Fork Length
The 22″ overall length on this springer fork kit directly influences your ride height and steering geometry. Unlike stock replacements, an over-stock length changes the rake and trail, altering how the front end tracks through corners and under braking. You need to verify how this 22″ measurement interacts with your specific frame neck angle and triple tree spacing. Failing to account for the length impact can result in a front end that feels unstable or bottoms out over minor road imperfections [NEED_CITE: steering geometry calculations for custom springer setups].
The Hidden Cost of Ignoring Thread Specifications
Ordering a springer fork kit without verifying the 3/4″-18 thread specification often leads to assembly delays and wasted parts. If the tapped holes in the rear fork legs do not match your riser studs, the kit sits on the bench while you source adapters or modify the risers. This mismatch forces builders to alter the brass plated rockers or springs, ruining the factory finish. Furthermore, if the overall 22″ length was not factored into your frame geometry, you might face steering issues that require swapping the entire front end, turning a simple bolt-on into a major fabrication project [NEED_CITE: common assembly errors with custom springer kits].
Sourcing Front End Depth and Finish Consistency
We produce our springer front ends in-house, allowing us to offer this 22″ springer fork kit with a consistent black finish and brass plated accents across every batch. Our front-end depth means you get the rockers, springs, top tree, and axle nuts in a single package, eliminating the need to source hardware from multiple vendors. Because we control the manufacturing, the thread quality on the 3/4″-18 tapped holes is verified before dispatch, ensuring your post risers seat correctly without cross-threading. This integrated approach guarantees that the finish on the top tree matches the axle nuts perfectly.
Documentation and Fitment Verification
- Fitment sheet stating applicable platforms and year ranges provided before quotation.
- Finish specification detailing the black base and brass plated components.
- Quality inspection record verifying the 3/4″-18 thread integrity on rear fork legs.
- Cross-reference sheet available if replacing existing hardware, marked reference only.
- Packing photographs showing the included rockers, springs, top tree, and axle nuts.
Receiving and Inspecting Your Springer Kit
- Verify the 22″ overall length matches your order and frame geometry requirements.
- Inspect the black finish and brass plated rockers, springs, top tree, and axle nuts for shipping damage.
- Check the 3/4″-18 tapped holes on the rear fork legs for debris or thread damage.
- Confirm the kit contents include all necessary hardware before beginning assembly.
- Store the kit in a dry environment to protect the finish and brass plating.
Requesting a Fitment Check
Send your model and year for a fitment check to ensure this 22″ springer fork kit matches your custom build requirements. Provide your rear fork leg measurements and riser thread specifications so we can verify the 3/4″-18 compatibility. Let us know if you need a sample for fitment confirmation before placing a bulk order for your shop.
Frequently Asked Questions
Q: How do I confirm this 22″ springer kit fits my specific custom frame?
A: We provide a fitment sheet stating applicable platforms and year ranges before quotation. You must verify the 22″ overall length impact on your frame geometry and confirm the 3/4″-18 thread compatibility with your chosen post risers. Send your model, year, and riser specs for a detailed fitment check.
Q: What is included in the springer fork kit and are the brass accents plated or painted?
A: The kit includes rockers, springs, top tree, and axle nuts. The brass accents on these components are plated, not painted, ensuring a durable finish that matches the black base. This plating process provides a consistent look across all included hardware for your custom build.
Q: How do I measure my rear fork legs to ensure the 3/4″-18 tapped holes align with my risers?
A: Measure the distance from the top of the rear fork legs to the center of the tapped holes. Compare this measurement to the stud length of your post risers. The riser stud must reach the top of the rear fork legs to ensure a secure mount without altering the 3/4″-18 threads.
Q: Can I order a single springer fork kit for a one-off custom build?
A: Yes, we offer a minimum order of one piece. You can order a single 22″ springer fork kit for a one-off custom build without meeting bulk thresholds. We also provide sample supply for fitment confirmation before you commit to larger orders for your shop.
Q: Do you provide a fitment sheet to verify platform compatibility before dispatch?
A: Yes, a fitment sheet stating applicable platforms and year ranges is provided before quotation. This document helps you verify that the 22″ length and 3/4″-18 thread specifications match your specific custom frame and riser setup before the kit is dispatched.